Overview
An All-Surface paint and primer in one, designed for direct application to many surfaces. The advanced formula allows for application on both interior and exterior surfaces which makes it ideal for the renovation of railings, garden furniture, radiators, and homewares. It also offers maximum adhesion for demanding substrates and dries to a highly durable hammered finish.
- Fade & chip resistant
- Rust preventative
- Superb adhesion to difficult surfaces
| Area | Interior & Exterior |
| Recommended Use | Metal, radiators, ceramics, UPVC, plastics, wood, mdf, laminates, tiles, masonry, brick and concrete |
| Coverage | Up to 10m² per litre |
| Drying Time | 4-8 hours, fully cured in 7 days |
| Re-Coat Time | 16 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush or roller |
Preparation
Always ensure the surface to be painted is free from dirt, debris and any contaminates which may affect adhesion.
- Completley remove any grease or oil with a detergent solution.
- Remove loose rust by scraping with a wire brush or sanding.
- Lightly abrade UPVC and remove any dust by wiping with a methylated spirit.
- On non-ferrous or galvanised metals we recommend using a suitable
- For best results seal porous surfaces prior to application.
Application
We recommend always performing a test patch on the surface to be painted to ensure you are happy with the finished results.
- Apply using a brush or short pile mohair roller.
- Stir thoroughly before use, do not thin.
- Apply 1-2 coats as needed and allow 16 hours between coats.
- Only apply in temperatures between 10°C and 32°C.
Always follow manufacturer's instructions found on the tin.
